INFO : CME Solo PINDAH ALAMAT di Jl. Perintis Kemerdekaan No.19 Purwosari - Solo 0271-720102

The Shop




-Screen 2 inch hight-output color TFT
-Freq range 133-177/195-280/395-520MHz
-Freq step 1000Hz
-Output Power : 3dBm
-Power Source ,Builit in 3,7v 1900mAH
-Charger sourch, any USB 5-5,5vdc
-Charger indicator Red Led signal normal charger
Green led Charger complacate
- Rf conector BNC

Harga: Call

SWR ANALYSER MFJ 269C (kosong)

MFJ-269C covers 530KHz to 230 MHz and 415 to 470 MHz -- an MFJ-269C exclusive! Includes all the features of MFJ-259C, the world’s most popular SWR Analyzer plus much more!
Large easy-to-read two line LCD display and side-by-side meters clearly display your
information. Built-in Ni-Cad/Ni-MH charger circuit, battery saver, low battery warning, smooth reduction drive tuning.Use as signal source for testing/alignment.
Built-in CoaxCalculator -- calculates coax line length in feet given coax length in electrical degrees and vice versa for any frequency and any velocity factor (great for building matching sections and phasing lines) -- an MFJ-269C exclusive!
New 12-bit A/D converter gives much better accuracy and resolution than common 8-bit A/D converters -- an MFJ-269C exclusive!
Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver.
530 KHz to 230 MHz Range Features
MFJ-269C gives you a complete picture of your antenna. Read antenna SWR and Complex Imped-ance 530 KHz to 230 MHz. Built-in frequency counter.
Lower band is retuneable to cover 470-940 KHz for maritime and 600 Meters.
Read Complex Impedance as series equivalent resistance and reactance (Rs+jXs) or as magnitude (Z) and phase (degrees).
Also reads parallel equivalent resistance and reactance (Rp+jXp) --MFJ-269C exclusive!
Determine velocity factor, coax loss in dB, length of coax and distance to short/open in feet.
Read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance. Also reads match efficiency.

Also read inductance in uH and capacitance in pF at RF frequencies.
Measure SWR and loss of coax with any characteristic impedance, 10 to over 600 Ohms, including 50, 51, 52, 53, 73, 75, 93,95,300,450 Ohms -- MFJ-269C exclusive!
415 to 470 MHz Range features
Just plug in your UHF antenna coax, set the frequency and read SWR, return loss and reflection coefficient simultaneously. You can read coax cable loss in dB and match efficiency.
You can adjust UHF dipoles, verticals, yagis, quads and other antennas and determine their SWR, resonant frequency and bandwidth.
You can test and tune stubs and coax lines. You can manually determine velocity factor and impedances of transmission lines.
Adjust and test RF matching networks and RF amplifiers without applying power.
Has easy-to-read LCD logarithmic SWR bargraph and SWR meter for quick tuning.
Take it anywhere
Fully portable, take it anywhere -- on remote sites, up towers, on DX-peditions.
Has built-in “N-type” connector.
Includes Free N-to-SO-239 adaptor.
Use 10 AA Ni-MH or Ni-Cad or alkaline batteries (not included -- alkalines cannot be charged internally) or 110-240 VAC with optional MFJ-1312D.
Compact 4W x 2D x 6 3/4H inches.
Maritime and 600 Meter Coverage

Harga: Call

SWR ANALYSER MFJ 266C (kosong)

MFJ HF/VHF/UHF Antenna Analyzer

1.5-185* MHz plus 220 and 300-490MHz

All the RF-diagnostic functions you need with easy-to-use MFJ-266C digital analyzer!

The MFJ-266C covers HF, VHF, plus UHFamateur and commercial frequencies with digital precision.
It also displays SWR, Complex Impedance, and Impedance magnitude simultaneously -- all on the same
easy-to-read LCD screen. Use it to measure Capacitance, Inductance, Field Strength, Frequency, plus
generate test signals. You can also fine tune stubs, analyze coax, test baluns and RF transformers, and
perform many other important RF-related tasks around the shack or on the road!

When it comes to simplicity and convenience, MFJ-266C is a winner. Not only is it easy-to-use, but fits comfortably in one hand for on-the-fly measurements on the bench or in the field. Here`s the rundown of what this compact powerhouse can deliver:

Frequency Coverage
The MFJ-266C covers all bases -- 160 through 6 Meters, the FM broadcast band, Airband, 2 Meters, 220 MHz, 70 cm, plus VHF/UHF commercial 2-way frequencies:
Band A: 1.5 to 2.7 MHz
Band B: 2.5 to 4.8 MHz
Band C: 4.6 to 9.6 MHz
Band D: 8.5 to 18.7 MHz
Band E: 17.3 to 39 MHz
Band F: 33.7 to 65 MHz (gap*)
Band V: 105 to 230 MHz 220 MHz!
Band U: 300-490 MHz

Harga: Call

SWR ANALYSER MFJ 259C (kosong)

MFJ-259C 530 KHz - 230 MHz SWR Analyzer
World’s most popular SWR analyzer is super easy-to-use
The famous MFJ-259C gives you a complete picture of your antenna’s performance. You can read your antenna’s SWR and Complex Impedance 530 KHz to 230 MHz continuously with no gaps.
You can read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees).
Determine velocity factor, coax loss in dB, coax length and distance to a short/open.
Read SWR, return loss and reflection coefficient at any frequency simultaneously.
You can read inductance in uH and capacitance in pF at RF frequencies.
Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information.
Built-in frequency counter, Ni-MH/Ni-CD charger circuit, battery saver, low battery warning and smooth reduction drive tuning.
Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver. SWR and Complex Impedance are displayed instantly!
Here’s what you can do
Find your antenna’s true resonant frequency. Trim dipoles and verticals.
Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll know exactly what to do by simply watching the display.
Perfectly tune critical HF mobile antennas in seconds for super DX -- without subjecting your transceiver to high SWR.
Measure your antenna’s 2:1 SWR bandwidth on one band, or analyze multiband performance.
Check SWR outside the ham bands without violating FCC rules.
Take guesswork out of building and adjusting matching networks and baluns.
Accurately measure distance to short or open in failed coax. Measure length of a roll of coax, coax loss, velocity factor and impedance.
Measure inductance, capacitance. Troubleshoot and measure resonant frequency, Q of traps, stubs, transmission lines, chokes, tuned circuits, baluns.
Adjust your antenna tuner for a perfect 1:1 match without creating QRM.
MFJ-259C is a complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and much more!
Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D.
Compact 4W x 6 3/4H x 2D inches

Harga: Call


Brand: MFJ
Manufacturer's Part Number: MFJ-269CPRO
Part Type: Antenna Analyzers
Product Line: MFJ 269C Pro RF Analyzers
DXE Part Number: MFJ-269CPRO

Antenna Analyzer Frequency Range: 0.53-230 MHz/415-520 MHz
RF Connector Type: Type N, female
Band Selection Control: Rotary switch
Frequency Control Style: Dial
Lockable Tuning Dial: No
Internal Battery Operation: Yes
Power Supply: Ten AA batteries
Batteries Included: No
External Power Input Voltage: 12 Vdc
Analyzer Width: 4.000 in.
Analyzer Height: 6.000 in.
Analyzer Depth: 2.000 in.
Quantity: Sold individually.
Notes: 415-520 MHz operation is for SWR, only.
SWR ANALYSER MFJ 269CPRO [kosong]Detail Produk
MFJ 269C Pro RF Analyzers combine five basic circuits: a variable oscillator, frequency counter, frequency multiplier, 50 ohm RF-Bridge, and a 12-bit A-D converter and microcontroller. They perform a wide variety of useful antenna and RF impedance measurements, including coaxial cable loss and electrical distance to an open or short. Applications to 520 MHz allow operations through many commercial/government VHF/UHF bands.

Primarily designed for analyzing 50 ohm antenna and transmission line systems, MFJ 269Cs measure RF impedances between a few ohms and several hundred ohms. An easily accessed user-controlled Z0 setting in the function menus allows for changing SWR and other SWR functions (i.e., return loss, reflection coefficient, match efficiency, etc.) to any normalized impedance value between 5 and 600 ohms. This feature is especially useful in 75 ohm and 300 ohm antenna systems.

MFJ 269C Pro RF Analyzers also function as a non-precision signal source and frequency counter. The operating frequency range of these units extends from 0.53 to 230 MHz in nine overlapping bands and includes extended SWR measurements on 415-520 MHz. They have an extended, commercial-style cabinet for lab work (helps to protect knobs and connectors from damage or "bump" changes). They require 10 AA size batteries for portable operation (sold separately).

MFJ 269C Pro RF Analyzers offer a great set of functions over an extensive range of frequencies. When you need a professional antenna-analyzing instrument with maximum capabilities, order one of these MFJ 269C Pro RF Analyzers,

Harga: Call